Hunterhip122

Info:

Once installed, the device has a careful icon in the device manager, This device works on Windows 7 64 with W7 drivers But not on Windows 10, once the drivers installed, we see the COM port associated (COM5 for example) but from the application, when we choose this port, we get a return message: the port does not exist. Change the COM port designation of your DATAQ Instruments device Change the COM port designation of your DATAQ Instruments Device to a COM port between 5 and 16. Before you begin, make sure the device is connected to your computer and if applicable, that power is. Windows 7 SP1,Windows 8,Windows 8.1,Windows 10 Important Notice The USB-MIDI Driver is for use with Studio Manager V2 Host, Editor, PM1D Manager and DME Designer. With the driver properly installed, your DI-720/730 series instrument will appear in the Windows Device Manager under “Universal Serial Bus controllers.” Once the USB drivers are installed, you can install WinDaq Software.

Model: Texas Instruments PCIxx12 Integrated FlashMedia Controller
Vendor: Texas Instruments
Version: 2.0.0.10

Dataq Instruments Port Devices Driver Download For Windows 10 64-bit

Operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
Bits: 32-bit (x86), 64-bit (x64)
Driver Date: 2009-05-25
Size: 0.2 mb

Driver description

Download driver Texas Instruments PCIxx12 Integrated FlashMedia Controller version 2.0.0.10 for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 32-bit (x86), 64-bit (x64).

File Name

• Data Acquisition and Data Loggers
> >

On this Page

Symptoms
Cause
Resolution
Manually Install the drivers
Applies To

Symptoms

DI-720, DI-722, and DI-730 series USB drivers do not automatically install under Windows 7.

Cause

64-bit Windows 7 and 64-bit Windows Vista will not automatically install 'unsigned' drivers.

Resolution

To resolve this issue:

Manually Install the drivers

Download the Drivers

Download the 64-bit DI-720/730 USB drivers from DATAQ Instruments (please note - this is a dead link and no longer available for download - for the latest drivers please submit a support ticket).

Disable Driver Signature Enforcement

When installing a DI-720/730 series, USB instrument on a 64-bit Windows Vista/7 PC, begin by disabling driver signature enforcement.*

1. Reboot your PC and press the F8 key before Windows loads to enter the “Advanced Boot Options” menu.
2. From the “Advanced Boot Options” menu, select “Disable Driver Signature Enforcement,” and press Enter.

Note: You must disable driver signature enforcement each time you reboot your PC.

Install the Drivers

1. Once Windows has finished loading, plug your DI-720/730 series instrument into an available USB port.
2. With the DI-720/730 connected, navigate to the Windows Device Manager (Start>>Computer>>Device Manager). You'll find the unit listed under “Other Devices” as an “Unknown Device.”
   
3. Right-click on the “Unknown Device” and choose “Update Driver Software…”
4. Choose “Browse my Computer for driver software.” Navigate to the location of the driver and click “Next.”
   
5. When notified that “Windows can't verify the publisher of this driver software,” choose “Install this driver software anyway.”
   
6. With the driver properly installed, your DI-720/730 series instrument will appear in the Windows Device Manager under “Universal Serial Bus controllers.”
   

Once the USB drivers are installed, you can install WinDaq Software.

Applies To

DI-720, DI-722, and DI-730 series USB products using 64-bit Windows Vista and 64-bit Windows 7.

Dataq Instruments Port Devices Driver Download For Windows 10 Free

* Disabling driver signature enforcement is a temporary measure that will no longer be necessary once the DI-720/730 USB driver is digitally signed by Microsoft. We are currently in the process of getting the driver signed.